The type of vehicle normally found in factories, warehouses and other work locations where moving heavy materials from one location to another is required is known as a forklift. The mast is the mechanism located on the front of the forklift that hydraulically lowers and lifts the load. The "cat" is the protected area where the forklift driver sits.
Forklifts can lift loads that weigh between one to five tons. Several kinds can be utilized to lift shipping containers and much heavier loads.
The tires of a forklift must be inspected and maintained regularly. The kinds of tires on different forklifts vary based on factors like for instance ground surfaces, frequency of use and load weights. Each and every forklift operator must have access to a forklift jack, tire press and replacement tires.
Tire Maintenance Instructions
You must regularly check the tires. Watch for signs of damage and wear to the tires. If the wear on the tire exceeds 40%, it must be replaced.
When buying tires, make certain that you are purchasing the correct type - pneumatic, polyurethane or solid.
When you need to replace the tires, the forklift jack must be positioned under the tire. You can easily change the tires if you raise the forklift high enough.
To remove the damaged tire, pull the tire from the rim utilizing the tire press. Install the new tire and properly secure it. If you are changing more than one tire and you have just one jack, lower the forklift, then reposition the jack at the next tire.
A repair company can offer on-site tire repair. If the tire is too big for both in-house and mobile tire presses, the tire which is damaged should be transported to a shop which has a stationary tire press.